By Navtaj Singh Sooch Junior Category (Grades 7-8) Study | Engineering and Computer Science, Physics
My project is about rc planes and drones. I made a rc plane and I also made a drone using a build lit that provides everything including a body. I will attach a video if you would like so I can show you the drone flying. The plane is made from foam and I put duct tape all over it so the wires and electronics are not damaged when landing. The plane is a twin propeller and is a three channel airplane. The drone is a standard type and has a fpv camera but the camera did not record so I don’t have any footage of that but I do have footage of it flying and the plane.
